1848 Addison Avenue East - Twin Falls, Idaho 83301 - (208) 736-8048 Open  M-F 9:30 AM. to 4:00 PM    Sat. 10:00 AM to 2:00 PM    Sunday Closed  MST
Categories What's New Hot Deals Blog: Dutch Oven Classes Blog: Customer Home Dutch Ovens Dutch Oven Lids Dutch Oven Cook Books Dutch Oven Accessories Dutch Oven Cook Table Charcoal Starter Lodge Indoor D. O. Lodge Fry Pans Cast Iron Bakeware Outdoor Toasters Backpacks Camp Furniture Camp Soap Fire Pans Fire Pits & Grills Fire Starter Flashlights Gold HuntersTest Hand Washer Hot Dog Sticks Knives Lanterns Marine Parts & Accessories Mosquito Repellant Outdoor Shower Pie Cookers Porta Pottie RV Parts & Accessories Sleeping Bags Smokers Stoves Survival Tents Trail Books Utensils Water Purifiers For Your Convenience View Cart! Camper's Checklist Dutch Oven Recipes Dutch Oven Tips Customer Services Privacy Statement Return Policy Shipping Policy Questions & Comments Links of Interest Log Cabin Grub Lodge Dutch Ovens Dutch Oven Cookbooks Hot Dog Forks Idaho Park Service Idaho Travel Guide National Park Service		Home : Leatherman Tool : Maintenance Tips Express Links: Winchester Cook Set Leatherman Gerber SOG Knives of Alaska Previous Next Maintenance Tips Rust and Corrosion All Leatherman Tool products are manufactured from 100% high-grade stainless steel. (Exception: Screw bits for the tool adapter are made of tool steel.) But stainless steel is not rust proof; it is corrosion resistant. Depending on the mix of metal alloys, stainless steels may be highly corrosion resistant and relatively soft (like kitchen flatware), or they may be somewhat corrosion resistant and quite hard. Our tools are fabricated from the latter type, so your tool components are strong and the knives retain a sharp cutting edge. Consequently, corrosion can occur in the absence of proper maintenance. Your Leatherman tool should be cleaned, dried and re-oiled periodically to inhibit rust and corrosion. This is especially true if you use your tool in a damp or marine environment. After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40). Buff stained surfaces with a polishing cloth or non-metallic abrasive (e.g., Scotchbrite pad or soft bristle brush). Blade Sharpening Leatherman tools feature knife blades that may be straight-edged, serrated or both. Sharpening methods vary depending on the type of knife in your Leatherman tool. Note that serrated edges should not be sharpened in the same manner as straight edges. Straight-edged blades can be sharpened using any standard equipment, including whetstones, rods and various kits. To sharpen a serrated blade, be sure to use a sharpening system specifically designed to accommodate serrated edges. A proper sharpening method will maintain the curvature of the serrations. Sharpen serrated blades only on the edged side; sharpening the flat (back) side of the knife will cause the serrations to wear away, reducing the knife's effectiveness. Cleaning Methods Depending on what your Leatherman tool has been exposed to, there are several cleaning methods to consider. If your tool has been exposed to salt water or marine environments, it should be thoroughly rinsed in fresh water, dried and lubricated with a water-displacing product. If stains or rust spots appear, refer to the Rust and Corrosion section above for removal tips. If debris or sticky substances have accumulated between the blades, your Leatherman tool may also be cleaned in a mild solution of detergent and water. To remove tar and similar substances, clean your Leatherman tool with turpentine or other mineral spirits. Do not use chlorine products. After cleaning, dry the tool and apply a light machine oil or a water-displacing product (WD-40) to force out moisture trapped in the joints. This also helps protect the tool from further corrosion and sticking. My tool broke. How do I get it repaired? Easy. Please refer to our Warranty section for instructions on submitting a warranty claim. Ship To: Leatherman Tool Group, Inc. ATTN: Warranty 12106 NE Ainsworth Circle Portland, OR 97220 Unfortunately, we can not be responsible for tools that never reach us. In the package, please include your name, return address and a brief description of the problem. Please do not ship us your tool sheath. Warranty E-mail: toolwarranty@leatherman.com

Questions & Comments


Secure Ordering. Your Privacy is Key!
© 1997-2008 A Happy Camper, All Rights Reserved!
Designed, Maintained & Hosted by: Internet Marketing Specialists & Donna